Tile Widget Set - combobox and entry?

Can someone with experience with the Tile Widget set (version 0.4) give me
some pointers on accessing the new combobox and entry widgets?  See my
earlier post below for details on my troubles.

Thanks,

Jeff


"Jeff Godfrey" <jeff_godfrey@pobox.com> wrote in message
news:10ii8elksc7laf3@corp.supernews.com...
: "Joe English" <jenglish@flightlab.com> wrote in message
: news:pgpmoose.200408191744.32380@despot.non.net...
: : [19 Aug 2004]
: :
: : ANNOUNCE: Tile Widget Set, version 0.4.
: :
: :     + New widgets: entry and combobox.
:
: Hi Joe,
:
: I just took my first look at Tile, and I must say it looks great -  nice
: work (for all those working on this extension)!
:
: I do have a question though - I notice that version 0.4 is supposed to
have
: new entry and combobox widgets (as noted in the above announcement) -
though
: I haven't figured out how to referece either of them.  There doesn't
appear
: to be a t<widget> command like the other standard widgets.  Scanning the
: available "t*" and "tile::*" commands didn't turn up anything either.
:
: Is this just a case of the documentation being a bit ahead of development,
: or have I missed something?
:
: Thanks for any advice.
:
: Jeff
:
:

"Jeff Godfrey" <jeff_godfrey@pobox.com> wrote
> Can someone with experience with the Tile Widget set (version 0.4)
> give me some pointers on accessing the new combobox and entry
> widgets?  See my earlier post below for details on my troubles.

I get this, after just extracting tile04.zip into my Tcl lib
directory:

% package require tile
0.4
% info command tcomb*
tcombobox
% info command tent*
tentry
%

Bob
--
Bob Techentin                   techentin.robert@NOSPAMmayo.edu
Mayo Foundation                                 (507) 538-5495
200 First St. SW                            FAX (507) 284-9171
Rochester MN, 55901  USA            http://www.mayo.edu/sppdg/

"Bob Techentin" <techentin.robert@mayo.edu> wrote in message
news:cgg5on$tie$1@tribune.mayo.edu...
: "Jeff Godfrey" <jeff_godfrey@pobox.com> wrote
: > Can someone with experience with the Tile Widget set (version 0.4)
: > give me some pointers on accessing the new combobox and entry
: > widgets?  See my earlier post below for details on my troubles.
:
: I get this, after just extracting tile04.zip into my Tcl lib
: directory:
:
:  % package require tile
:  0.4
:  % info command tcomb*
:  tcombobox
:  % info command tent*
:  tentry
:  %

Bob,

Thanks for the reply.

I can only assume that you are running on some *nix box and the issue must
be related to the Windows build.  I am running WinXP pro, and those
particular commands don't appear to be in the 0.4 dll I downloaded, as can
be seen below:

package require tile
0.4
% info command tcomb*
% info command tent*
%

Any thoughts?

Thanks,

Jeff

"Jeff Godfrey" <jeff_godfrey@pobox.com> wrote
>
> "Bob Techentin" <techentin.robert@mayo.edu> wrote
> : I get this, after just extracting tile04.zip into my Tcl lib
> : directory:
...
>
> I can only assume that you are running on some *nix box ...

Um, no.  Windows XP Professional with Service Pack 1.  I've got
TclDevKit 3.1 installed in C:\apps\Tcl, and I just extracted
tile04.zip into C:\apps\Tcl\lib, and it works.  I'm ping in tile's
pkgIndex.tcl file, and I see that it won't do anything with Tcl < 8.4.
Are you up to date?

Bob
--
Bob Techentin                   techentin.robert@NOSPAMmayo.edu
Mayo Foundation                                 (507) 538-5495
200 First St. SW                            FAX (507) 284-9171
Rochester MN, 55901  USA            http://www.mayo.edu/sppdg/

"Bob Techentin" <techentin.robert@mayo.edu> wrote in message news:<cgi384$cvq$1@tribune.may
o.edu>...
> "Jeff Godfrey" <jeff_godfrey@pobox.com> wrote 
>  ... 
>
> Um, no.  Windows XP Professional with Service Pack 1.  I've got
> TclDevKit 3.1 installed in C:\apps\Tcl, and I just extracted
> tile04.zip into C:\apps\Tcl\lib, and it works.  I'm ping in tile's
> pkgIndex.tcl file, and I see that it won't do anything with Tcl < 8.4.
> Are you up to date?
>
> Bob

I am using XP Pro and have Tcl 8.5a1 installed and get the same thing
with tile package 0.4.
No entry or combobox:

% package require tile
0.4
% info command tcom*
% info command ten*
% info command ::tile::*
::tile::label ::tile::menubutton ::tile::labelframe ::tile::frame
::tile::radiobutton ::tile::button ::tile::progress ::tile::takefocus
::tile::ThemeChanged ::tile::LoadImages ::tile::notebook
::tile::activate ::tile::Repeat ::tile::checkbutton ::tile::scrollbar
::tile::Repeatedly ::tile::CancelRepeat
% puts $tcl_patchLevel
8.5a1

Anthony

"Jeff Godfrey" <jeff_godfrey@pobox.com> wrote
> Well, I was running ActiveTcl 8.4.5.  When I did a "package require
tile", I
> seemed to get everything *except* the "tentry" and "tcombobox"
commands.  I
> have since upgraded to ActiveTcl 8.4.7 and the entire package is now
> available (using the save tile library).
>
> Apparently, the "tile" package is included in the ActiveTcl distro
(I didn't
> realize), because after upgrading, the pkgIndex.tcl file is now
different.


Hmmmm.  Vewwwwwy intewesting.

My symin upgraded my Windows Tcl installation while I was off on
vacation, but I'm pretty sure it just wrote ActiveTcl 8.4.6 on top of,
ummmm, whatever was there before.  Might have been 8.4.4.  Then I
unzipped tile04.zip without looking first.  I might have overwritten
something that was already there.  But now I see tile0.3 and tile0.4
directories in my Tcl/lib directory.  I'm honestly not sure what Tcl
or ActiveTcl or Tile dependencies are at work.

Bob
--
Bob Techentin                   techentin.robert@NOSPAMmayo.edu
Mayo Foundation                                 (507) 538-5495
200 First St. SW                            FAX (507) 284-9171
Rochester MN, 55901  USA            http://www.mayo.edu/sppdg/

Apologies for this. We had a version numbering mixup. Joe has only
recently created a release of tile 0.4 but the cvs version has been
this way for quite a while. Sometime ago I was asked for an updated
build and produced an interim build - so until last w the
tile04.zip file had an out-of-date version as was really 0.3++

--
Pat Thoyts          http://www.zsplat.freeserve.co.uk/resume.html
To reply, rot13 the return address or read the X-Address header.
PGP fingerprint 2C 6E 98 07 2C 59 C8 97  10 CE 11 E6 04 E0 B9 DD

----- Original Message -----
From: "Pat Thoyts" <cng@mfcyng.serrfreir.pb.hx>
Newsgroups: comp.lang.tcl
Sent: Wednesday, August 25, 2004 6:22 PM
Subject: Re: Tile Widget Set - combobox and entry?


>
> Apologies for this. We had a version numbering mixup. Joe has only
> recently created a release of tile 0.4 but the cvs version has been
> this way for quite a while. Sometime ago I was asked for an updated
> build and produced an interim build - so until last w the
> tile04.zip file had an out-of-date version as was really 0.3++

Pat,

Thanks for the clarification.  As I said in an earlier post, my missing
tcombobox and tentry widgets became available once I upgraded to ActiveTcl
8.4.7 - but....

After that upgrade, it seems that the "xpnative" theme was no longer
recognized (it was prior to the upgrade).  I don't know if there was
actually something wrong in the ActiveTCL package, or if something went
wrong during the installation (I overlayed 8.4.7 on top of 8.4.5).

So, after seeing your above message, I downloaded the latest "tile 0.4"
build from SF, and used it to replace the existing tile installation.  Now,
I have the missing widgets *and* the "xpnative" style.

Thanks,

Jeff

Jeff Godfrey wrote:
> So, after seeing your above message, I downloaded the latest "tile 0.4"
> build from SF, and used it to replace the existing tile installation.  Now
,
> I have the missing widgets *and* the "xpnative" style.

The xpnative style will be available in the ActiveTcl tile build
starting with the next version.  I had to make some fixes to the
source code to allow the xpnative style to build properly when
you compile on a non-XP machine (we build ActiveTcl on a Win2K
box).

--
Jeff Hobbs, The Tcl Guy
http://www.ActiveState.com/, a division of Sophos

"Jeff Hobbs" <jeffh@removethis.activestate.com> wrote in message
news:412D576D.9050803@removethis.activestate.com...
: Jeff Godfrey wrote:
: > So, after seeing your above message, I downloaded the latest "tile 0.4"
: > build from SF, and used it to replace the existing tile installation.
Now,
: > I have the missing widgets *and* the "xpnative" style.
:
: The xpnative style will be available in the ActiveTcl tile build
: starting with the next version.  I had to make some fixes to the
: source code to allow the xpnative style to build properly when
: you compile on a non-XP machine (we build ActiveTcl on a Win2K
: box).


Thanks Jeff.

That seems to be the final piece to the puzzle.

Jeff