| Thomas Lutz 2004-04-21, 11:46 am |
| For reading bar codes into a PB application, you have two choices.
Most bar code readers are available with one of two output options.
The first option is called "Keyboard Wedge" output where you unplug
your keyboard, plug the bar code reader into the keyboard port on your
PC and then plug your keyboard into the bar code reader. This
arrangement makes the bar code reader appear as it it were simply a
second keyboard. Your original keyboard continues to work as normal
however when you read a bar code, the data encoded in the bar code
appears to any application running on your PC as if it were typed in.
The keyboard wedge interface is extremely simple however it has a few
drawbacks. If you swipe a bar code, the cursor has to be in the
correct input field in the correct application otherwise you end up
reading bar code data into whatever application has the focus. This
can cause all sorts of potential problems as you can imagine. The
keyboard output also is limited in that you cannot modify the data in
any way before sending it into the program that is to receive the
data. For example, if you needed to parse a bar code message up into
pieces or remove some of a bar code message or add in a date or time
stamp you would not be able to with a normal keyboard wedge reader.
The other possible output option is to get a bar code reader with an
RS232 or "Serial" interface. With these types of bar code readers, you
connect the reader to an available serial port on the back of your PC.
You would then need to either write serial communication code to read
in the bar code data or use a program called a "Software Wedge" to
take the data from the bar code reader and feed it to the application
where you want the data to go. The di vantage to this approach is
that it is a little more complex however you gain much more control
over how and where your data ends up when you read a bar code. With a
Software Wedge, you do not need to write any serial I/O code and you
can control exactly where the data goes in the target application and
you can also perform all sorts of modifications on the data before it
is sent to the application.
TAL Tehchnologies sells a product called WinWedge which is a Software
Wedge for Windows.
Visit: http://www.taltech.com/products/winwedge.html
for more information about WinWedge.
TAL also sells a very high quality line of bar code laser scanners at
very reasonable prices. All their scanners are available with either
the keyboard wedge output or RS232 output. For scanners see:
http://www.taltech.com/products/bc_reader.html
This web site is also an extremely good place to obtain information
about bar coding in general be sure to look in the Resources section
of the site for a bar code tutorial.
For printing bar codes, you would be best off using a bar code ActiveX
control like the one fromTAL Technologies at the following URL:
http://www.taltech.com/products/activex_barcodes.html
If you need to print bar codes, I would recommend that you download
the demo of the TAL Bar Code ActiveX control from the above URL and
try using it in your PB application.
On Fri, 2 Apr 2004 10:24:41 +0200, "jk" <jk72@poczta.onet.pl> wrote:
>I'm searching any ideas how to use bar code reader (scanner) in PB
>application.
>
|