Home > Archive > Clipper > August 2007 > wrong ended application
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
wrong ended application
|
|
| Michal 2007-08-06, 7:55 am |
| Hi.Please help me in my problem .In my firm is server netware 5.0 and
clipper applications on dos desktops communicates over IPX protocol.
Sometimes in not known circumstances aplication is ended. Obviously
ntxes are fail. My question is where do I have to looking an error for.
Sorry my english is not well.
Michal
| |
|
| "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
grupi:f96ouh$i0q$1@nemesis.news.tpi.pl...
> Hi.Please help me in my problem .In my firm is server netware 5.0 and
> clipper applications on dos desktops communicates over IPX protocol.
> Sometimes in not known circumstances aplication is ended. Obviously ntxes
> are fail. My question is where do I have to looking an error for.
1] start cmd prompt
2] start your app typing app.exe name [not with shortcut from desktop]
3] wait untill app end with error
4] copy/paste that laste cmd screen with error printout here, error code
with text msg usualy helps
| |
| N:dlzc D:aol T:com \(dlzc\) 2007-08-06, 6:55 pm |
| Dear Michal:
"Michal" <otawa@wp.pl> wrote in message
news:f96ouh$i0q$1@nemesis.news.tpi.pl...
> Hi.Please help me in my problem .In my firm is
> server netware 5.0 and clipper applications on
> dos desktops communicates over IPX protocol. Sometimes in not
> known circumstances
> aplication is ended. Obviously ntxes are fail. My
> question is where do I have to looking an error for.
What version of Clipper do you have?
What RDD are you using in Clipper (DBFNTX, DBFCDX, or what)?
How many computers access the same files?
Does this happen daily, w ly, or many times daily?
Did this start happening recently, or has it just been getting
worse and worse?
I would look to see that my Clipper was updated to the most
current version. I would make sure that the first computer that
accesses the various files each day, renews the indexes. I would
have Netware check its hard drives for hard disk errors.
David A. Smith
| |
| Michal 2007-08-07, 3:55 am |
| N:dlzc D:aol T:com (dlzc) pisze:
> Dear Michal:
> "Michal" <otawa@wp.pl> wrote in message
news:f96ouh$i0q$1@nemesis.news.tpi.pl...
circumstances[color=darkred]
>
> What version of Clipper do you have?
Clipper 5.2
> What RDD are you using in Clipper (DBFNTX, DBFCDX, or what)?
mostly DBFNTX
> How many computers access the same files?
about 20 computers
> Does this happen daily, wly, or many times daily?
Recently meny times daily
> Did this start happening recently, or has it just been getting worse
and worse?
yes it has been getting worse and worse
> I would look to see that my Clipper was updated to the most current
version. I would make sure that the first computer that accesses the
various files each day, renews the indexes. I would have Netware check
its hard drives for hard disk errors.
>
> David A. Smith
| |
| Michal 2007-08-07, 3:55 am |
| sali pisze:
> "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
> grupi:f96ouh$i0q$1@nemesis.news.tpi.pl...
>
>
> 1] start cmd prompt
> 2] start your app typing app.exe name [not with shortcut from desktop]
> 3] wait untill app end with error
> 4] copy/paste that laste cmd screen with error printout here, error code
> with text msg usualy helps
>
I can't do this because desktops use dos client startupped from floppy disk
| |
| Saulius 2007-08-07, 7:55 am |
| Michal,
" <otawa@wp.pl> wrote in message news:f96ouh$i0q$1@nemesis.news.tpi.pl...
> Hi.Please help me in my problem .In my firm is server netware 5.0 and clipper applications on dos desktops communicates over IPX
> protocol. Sometimes in not known circumstances aplication is ended. Obviously ntxes are fail. My question is where do I have to
> looking an error for.
>
> Sorry my english is not well.
> Michal
Is somewhere in any station Novell Client installed ?
If yes, when it occured ?
Saulius
| |
| Marek Horodyski 2007-08-07, 7:55 am |
|
Użytkownik "Michal" <otawa@wp.pl> napisał w wiadomości
news:46B8258E.4040706@wp.pl...
> N:dlzc D:aol T:com (dlzc) pisze:
> news:f96ouh$i0q$1@nemesis.news.tpi.pl...
> circumstances
>
> Clipper 5.2
>
>
> mostly DBFNTX
Show here your error's procedure.
Regards,
Marek Horodyski
| |
| N:dlzc D:aol T:com \(dlzc\) 2007-08-07, 6:55 pm |
| Dear Michal:
"Michal" <otawa@wp.pl> wrote in message
news:f9989c$qrc$1@atlantis.news.tpi.pl...
> N:dlzc D:aol T:com (dlzc) pisze:
>
> Clipper 5.2
It should then be updated to 5.2e, if you have not already done
so:
http://www.the-oasis.net/ftpmaster....tent=ftp_ca.htm
.... one of the first two patches.
>
> mostly DBFNTX
This application that crashes only uses DBFNTX? Because they are
mutually incompatible drivers.
>
> about 20 computers
>
>
> Recently meny times daily
What changes have been implemented recently? New machines,
updated operating system, lots more seats running, is this a new
application (or module), or what...
I assume you have used rlock(), unlock, and commit as needed?
The others have asked for displayed error message as the
application terminates, and this will be helpful to you and them.
Depending on your third party libraries, you may want to let the
machines boot to Windows (or Linux with a little more effort),
and use:
http://www.xharbour.org
.... should be very few code changes, and you will have a native
32-bit application.
The commercial version at www.xharbour.com (xHarbour Builder) is
very good too.
David A. Smith
| |
| AUGE_OHR 2007-08-07, 6:55 pm |
| hi,
> I can't do this because desktops use dos client startupped from floppy
> disk
so what OS() you are using ?
what Network Client you are using ?
FILES= ??? in Config.sys ?
how do you open DBF and NTX Files ?
did you allways open all NTX belong to a DBF ?
are you NTX corrupt ?
greetings by OHR
Jimmy
| |
|
| "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
grupi:46B82628.5030607@wp.pl...
> sali pisze:
> I can't do this because desktops use dos client startupped from floppy
> disk
what os?, is it win-xp?
anyway, are you able to see the last error screen when app ends?
these are few lines that appear above c:\ prompt on the screen
| |
|
| Michal,
Are there any large database files? Also, are ther any indexes with a large
index key or are indexed on a large field. In my experience if you index on
a large field or have a long index key, this can restrict the amount of
records that can be stored.
After the crash are the indexes corrupted?
it might end up that you might have to archive off some data to fix this
Regards,
Pete
"Michal" <otawa@wp.pl> wrote in message news:46B8258E.4040706@wp.pl...[color=darkred]
> N:dlzc D:aol T:com (dlzc) pisze:
> news:f96ouh$i0q$1@nemesis.news.tpi.pl...
> circumstances
>
> Clipper 5.2
>
>
> mostly DBFNTX
>
>
> about 20 computers
>
>
> Recently meny times daily
>
> and worse?
>
> yes it has been getting worse and worse
>
> version. I would make sure that the first computer that accesses the
> various files each day, renews the indexes. I would have Netware check
> its hard drives for hard disk errors.
| |
| Michal 2007-08-09, 3:55 am |
| sali pisze:
> "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
> grupi:46B82628.5030607@wp.pl...
>
> what os?, is it win-xp?
>
> anyway, are you able to see the last error screen when app ends?
> these are few lines that appear above c:\ prompt on the screen
>
>
first lines of de screen go out beceuse informations from batch in login
script are writes.
| |
| Michal 2007-08-09, 3:55 am |
| N:dlzc D:aol T:com (dlzc) pisze:
> Dear Michal:
>
> "Michal" <otawa@wp.pl> wrote in message
> news:f9989c$qrc$1@atlantis.news.tpi.pl...
>
> It should then be updated to 5.2e, if you have not already done
> so:
> http://www.the-oasis.net/ftpmaster....tent=ftp_ca.htm
> .... one of the first two patches.
>
>
> This application that crashes only uses DBFNTX? Because they are
> mutually incompatible drivers.
>
>
> What changes have been implemented recently? New machines,
> updated operating system, lots more seats running, is this a new
> application (or module), or what...
I have changed computers to new architecture (AMD board) and recently
server to HP (last model HP supported to Netware 5.0)
I can't recompile programs because I haven't right to do this.
> I assume you have used rlock(), unlock, and commit as needed?
> The others have asked for displayed error message as the
> application terminates, and this will be helpful to you and them.
>
> Depending on your third party libraries, you may want to let the
> machines boot to Windows (or Linux with a little more effort),
> and use:
> http://www.xharbour.org
> .... should be very few code changes, and you will have a native
> 32-bit application.
> The commercial version at www.xharbour.com (xHarbour Builder) is
> very good too.
>
> David A. Smith
>
>
| |
|
| "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
grupi:f9ebrl$gec$1@atlantis.news.tpi.pl...
> sali pisze:
> first lines of de screen go out beceuse informations from batch in login
> script are writes.
well, then for test purposes insert one "pause" in batch, just after
app.exe, and when app crashes, read that error info from the screen.
explain your usesrs that pressing "any key" to continue "pause" after ending
app is just temporarly
the other solution is to rebuild app with custom error sys, to record error
message into file
| |
| Michal 2007-08-09, 7:55 am |
| sali pisze:
> "Michal" <otawa@wp.pl> je napisao u poruci interesnoj
> grupi:f9ebrl$gec$1@atlantis.news.tpi.pl...
>
> well, then for test purposes insert one "pause" in batch, just after
> app.exe, and when app crashes, read that error info from the screen.
> explain your usesrs that pressing "any key" to continue "pause" after ending
> app is just temporarly
>
> the other solution is to rebuild app with custom error sys, to record error
> message into file
>
Thanks for good idea, I'll do it.
| |
| Andrzej P. Wozniak 2007-08-09, 7:55 am |
| Osoba podpisana jako Michal <otawa@wp.pl> w artykule
<news:f9edm2$m1u$1@nemesis.news.tpi.pl> pisze:
> N:dlzc D:aol T:com (dlzc) pisze:
> I have changed computers to new architecture (AMD board) and recently
> server to HP (last model HP supported to Netware 5.0)
You changed server and I'm afraid you did NOT configure it properly. You
should search in the archive of Polish newsgroup pl.comp.sys.novell for
"turbodis" keyword.
> I can't recompile programs because I haven't right to do this.
You can patch the programs for R6003 error - look at the
pl.comp.bazy-danych FAQ:
http://www.dbf.pl/faq/tresc.html?rozdzial=3#o3_4
--
Andrzej P. Woźniak uszer@pochta.onet.pl (swap z<->h in address)
Grand Inquisitor pl.comp.bazy-danych No.1 http://www.dbf.pl/faq/
Clipper Mini FAQ po polsku http://clipper.rox.pl/
pl.comp.sys.novell FAQ http://novell.gru.pl
|
|
|
|
|